Xerox 8850 用户手册

Select the CALIBRATION MOTOR option to set the calibration zone 
motor. 

To run the CALIBRATION MOTO R diagnostic: 

1.  Press the Menu key.  The MAIN MENU screen is displayed. 

2.  Press the Next key until DIAGNOSTICS is highlighted. 

3.  Press the Enter key to select DIAGNOSTICS.  The 

DIAGNOSTICS menu screen is displayed. 

4.  Press the Next key until SCANNER DIAGNOSTICS is displayed. 

5.  Press the Enter key to select SCANNER DIAGNOSTICS.  The 

SCANNER DIAGNOSTICS menu screen is displayed. 

6.  Press the Next key until COMPONENT TESTS is highlighted. 

7.  Press the Enter key to select COMPONENT TESTS.  The 

COMPONENTS TESTS menu screen is displayed. 

8.  Press the Next key until CALIBRATION MOTOR is highlighted. 

9.  Press the Enter key to select CALIBRATION MOTOR.  The 

CALIBRATION MOTOR screen is displayed. 

CALIBRATION
MOTOR

MOTOR: OFF

FUNCTION:       GO TO HOME

 

10.  Press the Previous or Next key to select FUNCTION. 

11.  Press the Enter key to select FUNCTION. 

12.  Press the Previous or Next key to highlight the desired function.  

The choices are GO TO WIDTH, GO TO CALIBRATE, GO TO 
HOME, FIND HOME, and ROTATE. 

13.  Press the Enter key to confirm your selection. 

14.  Press the Previous or Next key to highlight MOTOR. 

15.  Press the Enter key to confirm your selection. 

16.  Press the Previous or Next key to highlight ON.  The choices 

are ON and OFF.  The requested operation will execute. 

If a GO TO or FIND function has been selected, the MOTOR field will be 
automatically set to OFF when the MOTOR field is once again selected.  
If the ROTATE function has been selected, the motor will run 
continuously until you set the MOTOR field to OFF.