Xerox 8850 用户手册

A finishing device, such as a folder, can be connected to the WIDE 
FORMAT COPY SYSTEM  If such a device is connected, the Finisher 
key enables or disables that device. 

To enable/disable a finishing device: 

1.  Press the Finisher key.  The Finisher indicator lamp illuminates 

and the FINISHER menu screen are displayed.  The black 
arrows indicate that the menu contains more options than are 
visible.  The selected option is highlighted. 

 

FINISHER

FOLD PROGRAM

TITLE BLOCK LOCATION
OUTPUT BIN
OVERLENGTH OPTION
TAB OPTIONS

 

FINISHER

FINISHER OPTION
IS NOT AVAILABLE

 

When a set is being built, the finisher options cannot be changed and 
pressing the Finisher key is invalid.  The error screen shown below is 
displayed.  Enable the finisher and select the finisher options either 
before selecting the Sets Build option or after the set has been built. 

FINISHER

 FINISHER OPTION CANNOT BE CHANGED
 DURING SETS BUILD OPERATION

 

For either error screen, press the  Exit key to return to the READY 
screen.  The Finisher indicator lamp is extinguished 

2.  Press the Previous or Next key to scroll through the list of 

options. 

3.  When the desired option is highlighted, press the Enter key to 

select the option.  The screen for the selected option is 
displayed.  See Finisher menu options below and on the next