Xerox 7700 用户手册

 

Tr

an

sp

ar

enc

ie

s

Using non-Phaser 7700 transparency film

The printer features a unique oil-less fuser. Phaser 7700 Premium 
Transparency film is designed specifically to work with the printer's 
fuser. If you wish to use non-Phaser 7700 transparency film you must 

use film that meets the following specifications:

■

Compatible with oil-less fuser systems

■

Fusing temperature: 165C

■

Thickness: 4.7 mil (120 micrometer)

■

Stiffness: 250 mgf Gurley Units minimum

Transparency film that does not meet these specifications can produce 
poor image quality, jam in the printer, wrap around the fuser rollers 
and even melt on the fuser rollers. Some non-Phaser 7700 
transparencies have paper tape on the leading edge that can separate in 
the heat of the fuser, leading to damage. Using non-Phaser 7700 
transparencies may damage the fuser. Damage caused by using 
non-supported media may not be covered under the warranty, service 
agreement, or Total Satisfaction Guarantee. 

If there is a jam in the fuser when using a non-Phaser 7700 
transparency, the print job is cancelled and cleaning pages are 
automatically sent through the printer. 

Note

Xerox and Xerox Phaser transparency films developed for 
other Xerox printers and copiers are not meant to be used 
with the Phaser 7700 printer. Using them may damage the 
fuser and may not be covered by the warranty.