Xerox 7700 用户手册

 

Stap

lin

g

Using the Stapler

The optional finisher can staple sets of up to 50 sheets of 90 g/m

2

 

(20 lb. bond) paper or 35 sheets of 105 g/m

2

 (28 lb. bond) paper. Once 

the set of copies is stapled, it is delivered to the finisher output tray. 
The stapler holds 5000 staples.

Note

You cannot staple from the Multi-Purpose Tray (MPT).

Notes about stapling:

■

If output sheets are sent to the stapler unit but the sheet count 
exceeds 50, the sheets are sent to the finisher tray without being 
stapled. Further sheets then bypass the stapler unit, going directly 
into the finisher tray.

■

If output sheets are sent to the stapler unit and then the paper type 
changes during the job to an unsupported type, stapling is turned 
off and any sheets in the stapler unit are sent to the finisher 
output tray. Unsupported paper types then bypass the stapler 
unit, going directly into the finisher tray.

■

If stapling is on and you are printing multiple copies, check the 

Collate box, otherwise all the copies of each page are stapled 
instead of each set of copies.

■

When the stapler is empty, a message displays on the front panel 
but printing continues with pages sent to the finisher tray without 
being stapled.

■

If you select the top output tray and stapling, the output will be 
stapled and sent to the finisher output tray not the top output tray.