Xerox 7675 用户手册

18

Configuration Report

The Configuration Report details the machine software versions and network settings configured for the 
machine. The Configuration Report automatically prints when the machine is rebooted or powered on. The 
report can be printed at any other time by following these instructions.

NOTE: If there is no Configuration Report button the machine does not have a network controller and 
is unable to be connected to the network. Contact your Xerox Sales Representative to purchase a 
network controller if you wish to connect your machine over the network.

1.

Press the [Machine Status] button.

2.

Touch the [Print Reports] button.

3.

Touch the [Configuration Report] button.

4.

Touch [Print Selected Report], then touch [Close].

1.

Press the [Log In / Out] button to enter the Tools pathway.

2.

On the keypad enter [admin], then [1111] or the current password.  Touch the [Enter] button when 
finished.

3.

Touch [Machine Status], then the [Tools] tab.

4.

Touch [Connectivity and Network Setup].

5.

Touch [General].

6.

Select [Configuration Report].

7.

Select [Do Not Print Report]

8.

Touch the [Save] button.

9.

Touch [Log In / Out] to exit the Tools pathway.