Xerox 7675 用户手册

50

1.

Open your Web browser and enter the TCP/IP address of the machine in the Address or Location field. 
Press [Enter].

2.

Click the [Properties] tab.Enter the Administrator User name and password if prompted.  The default is 
[admin] and [1111].

3.

Click the symbol to the left of [Connectivity].

4.

Click the symbol to the left of [Protocols].

5.

Select [Microsoft Networking] in the directory tree.

6.

Check the [Enabled] box to enable Microsoft Networking.

7.

Select TCP/IP or NetBIOS from the [Transport] drop-down list.

8.

Enter the maximum number of connections allowed in [Maximum Connections]. The range is 10 - 30.

9.

Enter the Connection Timeout in the available box. The range is 1 - 32767 seconds.

10. Enter the workgroup name in the [Workgroup] box.

11. Enter the [SMB Host Name] and type a descriptive comment in [SMB Host Name Comment] (optional).

12. Type the [Share Name] and type a descriptive comment in [Share Name Comment] (optional).

13. Check the [Enabled] box to enable WINS.

14. Enter the IP Address of a Primary WINS server, and port.

15. Enter the IP Address of a Secondary WINS server and port.

NOTE: If DHCP is configured, WINS IP Address(es) will be overridden.

16. Click [Apply] to accept the changes or [Undo] to return the settings to their previous values.

NOTE: The settings are not applied until you reboot the machine.

17. Click the [Status Tab].

18. Click the [Reboot Machine] button and click [OK] to reboot the machine. The network controller takes 

approximately 5 minutes to reboot and network connectivity will be unavailable during this time.