Xerox 7675 用户手册

72

UNIX

You can use CentreWare to configure in this environment. Click here for more information.

CentreWare for Unix supports a variety of Unix and Linux platforms and provides procedures which will 
enable you to connect the machine in these environments. To use CentreWare for Unix to configure 
printing locate the CentreWare Print and Fax Drivers CDROM delivered with your machine.

Before starting the installation procedure, please ensure the following items are available or have been 
performed:

1.

Ensure that the correct IP Address is being used for the machine. To verify this, print a Configuration 
Report from the machine.

2.

Press the [Machine Status] button.

3.

Touch the [Print Reports] button.

4.

Touch [Configuration Report], touch [Print Selected Report], then touch [Close].

The configuration report will print. Verify the addresses detailed under TCP/IP Settings. If the TCP/IP 
Settings are incorrectly configured, refer to the Read Me topic of this guide for the path to TCP/IP settings 
at the machine.

5.

Ensure the machine is connected to the network with Ethernet cabling.

6.

Ensure you can PING the machine IP address from the Unix workstation

7.

Locate the CentreWare Print and Fax Drivers CD (optional). The CD is contained in the CentreWare 
Network Services Pack delivered with your machine.

HP-UX workstations require specific installation steps to communicate with the machine. The machine is a 
BSD style UNIX printer, whereas HP-UX is System V style UNIX. Use the correct case when entering 
commands; UNIX commands are case sensitive.

1.

Add the machine hostname to the etc/hosts file on the HP-UX workstation.

2.

Ensure that you can ping the machine from the HP-UX workstation, using the hostname found in the /
etc/hosts file.

3.

Use either the GUI method or the tty Method as follows: