Xerox 780 用户手册

The printer’s built-in Ethernet connector has the following connections and 
indicators:

LINK indicator (Phaser 360 only); on indicates a working connection to a 
hub, off indicates no connection to a hub.  

RCV  indicator (green); blinks while the network interface is receiving.

XMT indicator (yellow); blinks while the network interface is transmitting.

Twisted pair (10BaseT) connector.           

The PhaserShare Series B Ethernet card has the following connections and 
indicators:

TX indicator (yellow); blinks while the network interface is transmitting.

RX Link indicator (green); blinks while the network interface is receiving.

Speed indicator (yellow); on indicates 100 Mbps, off indicates 10 Mbps.

Twisted pair connection indicator; on indicates a working connection to a 
hub, off indicates no connection to a hub.  If the 10Base2 connector (

) is 

used, this indicator is off.

Twisted pair (10BaseT or 100BaseTx) connector. 

Thin coax (10Base2) connector.                

0180-01

9789-05

100
Mbs

10/100Base-TX

10Base2

TP
LINK

TX

RX