Xerox P1202 用户手册
DocuPrint P1202 User Guide
1-4
EN
G
L
I
S
H
Printer Unpacking and Setup
1
Remove the printer and all accessories from the packing carton.
Save the carton and packing materials in case you need to repack the printer for
service or storage.
service or storage.
2
Make sure that your printer came packed with the following items:
• Laser print cartridge
• Power cord
• User Guide (this book)
• Warranty Information
• DocuPrint P1202 CD-ROM
• Power cord
• User Guide (this book)
• Warranty Information
• DocuPrint P1202 CD-ROM
This CD-ROM contains the software required to operate your printer,
along with useful printer utilities and a complete Reference Guide. Should
your computer not be equipped with a CD-ROM drive, please visit the
Xerox website at www.xerox.com. If you do not have Internet access, refer
to “Making Installation Diskettes“ (page 1-18) for detailed instructions for
creating installation diskettes.
along with useful printer utilities and a complete Reference Guide. Should
your computer not be equipped with a CD-ROM drive, please visit the
Xerox website at www.xerox.com. If you do not have Internet access, refer
to “Making Installation Diskettes“ (page 1-18) for detailed instructions for
creating installation diskettes.
Additional items contained on the CD-ROM that are not accessed through the
main setup routine:
main setup routine:
- Adobe Acrobat Reader located in the Acrobat directory.
- Documentation located in the Docs directory:
- Documentation located in the Docs directory:
Reference Guide: XX_P1202R.pdf (where XX indicates the language code
*
)
User Guide: XX_P1202R.pdf (where XX indicates the language code)
The printer box may also contain an IEEE 1284-compliant printer cable. Look at
the drawings labeled “Contents” on the top flap of the box. If a printer cable is not
pictured there, you will need to obtain a cable before installing the printer.
the drawings labeled “Contents” on the top flap of the box. If a printer cable is not
pictured there, you will need to obtain a cable before installing the printer.
If any items are missing or damaged, notify your dealer immediately.
3
Carefully remove any shipping tapes from the printer.
4
Place the printer on a flat, stable surface near your workstation. Leave at least
6 inches (15 cm) behind and on each side of the printer, and at least 1 foot (30 cm)
in front of the printer, so that you can operate it properly and allow adequate air
circulation.
6 inches (15 cm) behind and on each side of the printer, and at least 1 foot (30 cm)
in front of the printer, so that you can operate it properly and allow adequate air
circulation.
Do not place the printer:
• In direct sunlight.
• Near heat sources or air conditioners. Place the printer where the temperature
• Near heat sources or air conditioners. Place the printer where the temperature
is stable and set for comfort.
• In dusty or dirty environments. Dust accumulation may prevent the printer
from functioning properly.
• Near devices that contain magnets or generate magnetic fields (such as
loudspeakers or base units of cordless telephones).
* Refer to table on last page for language codes.