Xerox P12 用户手册
128
•
Chapter 8
8-4-2
Installing a SIMM
SIMM and controller boards are sensitive to static electricity. Before
installing a SIMM, discharge static electricity from your body by touching a
metal object, such as the metal back plate on any device plugged into a
grounded power source. Also, if you walk away before the installation is
completed, when you come back, be sure to discharge any static
electricity again, then continue with the installation.
metal object, such as the metal back plate on any device plugged into a
grounded power source. Also, if you walk away before the installation is
completed, when you come back, be sure to discharge any static
electricity again, then continue with the installation.
Use the following procedure to install a SIMM.
1
Turn off the printer.
Failure to turn off the printer before working with its internal components
can result in electric shock.
2
Unplug the power cord from the wall outlet.
3
Remove the power cord from the back of the printer.
4
Push the release button to open the top cover and pull out the
250-sheet paper cassette far enough for you to grip the side
panel.
250-sheet paper cassette far enough for you to grip the side
panel.