Xerox NC60 用户手册
How to Clear A Media Jam
Chapter 5: Troubleshooting
❖
5-7
Fuser/Output
Area Jam
1
Open the Front Cover. (See page 1-12.)
2
Open the Fuser Cover. (See page 1-13.)
3
Release the Roller by shifting the Release Lever as shown.
4
Locate the lodged material by looking inside the Fuser
area.
area.
Exercise caution as some internal printer
surfaces are hot.
surfaces are hot.
Do not remove the Fuser to clear a jam.
If media wraps around a roller in the Fuser, replace
the Fuser. Use only recommended media.
the Fuser. Use only recommended media.
Figure 5.2 Fuser/Output/Print Drum Area Jam
1
2
3