Xerox 701P47301 用户手册

下载
页码 56
3 - 1 8
IPDS User Guide
Using Xerox FreeFlow® Print Server IPS Manager
the print server only supports these features for spooling jobs, 
and Xerox FreeFlow® Print Server IPDS can only be used with 
streaming queues.
NOTE: The system can feed inserts and covers from non-fusing 
tray in response to application commands as described in 
.
NOTE: If job accounting on the host is to be accurate and to avoid 
limitations of the Save facility with the IPDS jobs, use the Print and 
Retain feature on the host.
Multiple Copy Page Counting Constraints and Considerations
The following considerations apply to the use of the Output 
Quantity (multiple copies) feature with IPDS:
Some IPDS hosts may time-out the printer, if a response is not 
received within a certain period of time. Therefore, the user 
should only use the Xerox FreeFlow® Print Server Output 
Quantity (multiple copies) queue feature for relatively low 
numbers of uncollated copies, or a relatively small run of 
collated copies. As a rule of thumb, host commands, rather 
than the print server Output Quantity feature, should be used, 
if Xerox FreeFlow® Print Server copy processing is likely to 
delay job processing or page reports for four minutes, or more. 
After printing a page, Xerox FreeFlow® Print Server will 
include the page in the count of stacked pages it provides to 
the IPDS host. If the printer subsequently prints additional 
copies of the page in response to the print server Output 
Quantity setting, it cannot report these additional copies of the 
page to the host, since the host does not recognize them, and 
doing so would distort the stacked page count. Therefore, 
once the printer tells the host that all pages in the job have 
been stacked, the host considers the job complete, even if a 
substantial number of additional pages remain to be printed to 
meet the required output quantity. If there is a failure, after all 
pages in the job have been reported to the host as stacked, 
but before all copies have printing, IPDS host recovery will not 
cause the remaining copies to print, since it will appear to the 
host that the job has already completed.
If a failure occurs while Xerox FreeFlow® Print Server is 
processing multiple copies for an IPDS job, additional copies 
will be printed for pages retransmitted by the host, even if 
copies were previously created for the page. Depending on 
when the failure occurred, there could be additional copies, up 
to double the expected number of copies, for all retransmitted 
pages.\