Xerox 701P47409 用户手册

Before sending a document to a print queue, you must make sure 
that the resolution of the font used in the document is the same as 
that specified for the queue.

If the font and queue resolutions do not match (for example, a 
document with a 600 dpi font is sent to a 300 dpi queue), the font 
may print with subtle distortions and could be rejected at the bank.

Follow this procedure to set the font resolution as a queue 
property:

1. Select the Queue pull-down menu, and select Queue 

Manager.

2. On the Queue Manager window, right-click the desired queue 

name, and select Properties from the pop-up menu.

3. From the Format menu on the Properties window, select the 

appropriate default format for the Print Description Language 
(PDL) used in your MICR jobs.

4. Select the PDL Settings tab and select the desired 

decomposer (PostScript/PDF, PCL, or LCDS).

5. Select the resolution. 

NOTE 1: When selecting the resolution for PCL, you must select 
the Override icon if the PCL job does not explicitly specify 600 dpi 
as the PCL Unit.

NOTE 2: 1200 by 600 dpi is not a valid resolution for the DP 100/
115/135/155/180 EPS. Selecting this option may result in job 
errors.

NOTE 3: Ensure that the font and queue resolutions match.  If the 
font and queue resolutions do not match, the font may print with 
subtle distortions that could cause the form to be rejected.

6. Click OK.

You can change the font resolution for an individual job from the 
Job Manager window. 

1. On the Job Manager window, right-click the job you want to 

change, then select Properties from the pop-up menu.

2. On the Properties window, select the Image Quality tab.

3. From the Resolution menu, select the desired resolution 

option.

4. Click OK.