Xerox Phaser 3260DI 用户手册

802.1X Authentication

Xerox

®

 Phaser

®

 3052/3260

User Guide

113

802.1X Authentication

This is the procedure to follow to install and setup 802.1X Authentication:

Overview

The Xerox machine supports IEEE 802.1X Authentication via Extensible Authentication Protocol (EAP). 
IEEE 802.1X ensures all machines on the network are authenticated and authorized to use the 
network. 802.1X can be enabled for machines connected through wired Ethernet networks.

The Administrator can configure the machine to use one EAP type. EAP types supported on the 
machine are:

•

EAP-MD5

•

PEAP

•

EAP-MSCHAPv2

•

EAP-TLS

Information Checklist

Before starting, ensure that the following items are available and/or the tasks have been performed:

•

802.1X authentication must be supported on the network where the machine is connected.

•

Ensure that your 802.1X Authentication Server and authentication switch are available on the 
network.

•

Create a User Name and Password on your Authentication Server that will be used to authenticate 
the machine.

Authentication via TLS requires a Device Certificate to be configured or uploaded to the machine. For 
instructions, refer to 

Access the Machine Digital Certificate Management Screen

.

Authentication via PEAP and TLS require a Root Certificate to be uploaded to the machine. For 
instructions refer to Install Root Certificate.

1.

At your workstation, open the Web browser and enter the IP Address of the machine in the 
Address Bar.

2.

Press Enter.

3.

Select the Properties icon.

4.

If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login. 
Click Properties.

5.

In the Security link on the left hand side select the Network Security link.