Xerox Phaser 3260DI 用户手册

Common Problems

Xerox® Phaser® 3052/3260

User Guide

141

Print Quality Problems

If the inside of the machine is dirty or paper has been loaded improperly, there might be a reduction in 
print quality. See the table below to clear the problem. 

The machine does not print a 
PDF file correctly. Some parts of 
graphics, text, or illustrations 
are missing.

Incompatibility between the 
PDF file and the Acrobat 
products.

• Printing the PDF file as an image 

may enable the file to print. Turn on 
Print As Image from the Acrobat 
printing options. It will take longer to 
print when you print a PDF file as an 
image.

The print quality of photos is 
not good. Images are not clear.

The resolution of the photo is 
very low. 

• Reduce the photo size. If you 

increase the photo size in the 
software application, the resolution 
will be reduced. 

Before printing, the machine 
emits vapor near the output 
tray.

Using damp paper can cause 
vapor during printing.

• Load a new batch of paper. 

• To avoid the paper absorbing too 

much moisture, do not open 
packages of paper until required.

The machine does not print 
special- sized paper, such as 
billing paper.

Paper size and paper size 
setting do not match.

• Set the correct paper size in the 

Custom Paper tab in the Printing 
Preferences (See 

Paper Options

.)

Light or faded print

• If a vertical white streak or faded area appears on the page, the toner supply is low. 

You may be able to temporarily extend the toner cartridge life. (See 

Redistributing 

Toner.

) If this does not improve the print quality, install a new toner cartridge.

• The paper may not meet paper specifications; for example, the paper may be too 

moist or rough. (See 

Media Guidelines

.)

• If the entire page is light, the print resolution setting is too low or the ECO mode is 

on. Adjust the print resolution and turn the ECO mode off. See the help screen of the 
printer driver.

• A combination of faded or smeared defects may indicate that the toner cartridge or 

the area around it needs cleaning. (See 

Cleaning the Machine.

) If these steps do not 

correct the problem, call for service. 

Toner specks

• The paper may not meet specifications; for example, the paper may be too moist or 

rough. (See 

Media Guidelines

.)

• The transfer roller may be dirty. Clean the inside of your machine. (See 

Cleaning the 

Machine

.)

• The paper path may need cleaning. Call for service.