Xerox Phaser 3260DI 用户手册

Windows Drivers

Xerox® Phaser® 3052/3260

User Guide

33

Windows Drivers

Installing Windows Drivers

The following provides an overview of the print procedure and features available when printing using 
Windows.

A local printer is a printer directly attached to your computer using a printer cable, such as a USB cable. 
If your printer is attached to a network, refer to refer to 

Networked Printer

.

Note: 

If the New Hardware Wizard window appears during the installation procedure, select 

Close or Cancel.

1.

Make sure that the printer is connected to your computer and powered on.

2.

Insert the supplied CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, and 
an installation window appears. 

If the installation window does not appear, select Start and then Run. Type X:\Setup.exe, 
replacing X with the letter which represents your drive and select OK.

If you use Windows Vista, select Start > All programs > Accessories > Run, and type X:\Setup.exe. 
If the AutoPlay window appears in Windows Vista, select Run Setup.exe in the Install or run 
program field, and select Continue in the User Account Control window.

3.

Select Install Software. A Printer Connection Type window displays.

4.

Select USB connection. The Select Software to Install window displays.

5.

Leave the default selections and select Next. The Installing Software window displays.

6.

After the installation is finished, the Setup Completed window displays. 

7.

Select Print a test page and select Finish.

If your printer is connected to the computer, a Test Print page prints. If the Test Print operation is 
successful, refer to the 

Print 

chapter of this guide. If the print operation failed, refer to the 

Troubleshooting

 chapter of this guide.