Xerox 7000 用户手册
DocuColor 8000/7000 Operator Manual
6-10
6. Maintenance
Cleaning the Second Transport and Fusing areas
Use the following procedure if your output prints have dirt or
contamination on them or if you receive multiple paper jams in
Area 4.
NOTE: It is recommended that you perform this procedure one
time per day, preferably at the start of the day before the digital
press is switched on and the fuser is hot.
time per day, preferably at the start of the day before the digital
press is switched on and the fuser is hot.
WARNING:
If the digital press is switched on and the fuser is hot,
be sure to switch off the digital press power and allow 15 minutes
for the fuser to cool before performing this procedure.
1. Open the front doors.
Front doors