Xerox 701P25032 用户手册

1. Log in as root.
2. Kill tcmrpcsvc process
3. Restart tcmrpcsvc process with

 /opt/XRXnps/XRXtpclnt/bin/tcmrpcsvc

from a terminal window to monitor its output message.

4. Start Tape Client user interface in stand-alone mode with

opt/XRXnps/XRXtpclnt/bin/tapeclient

from a terminal window to monitor its output message.

An image quality problem exists if a job has been submitted 
successfully, but does not print correctly.

NOTE: If Image Quality parameters are changed, the Xerox 
FreeFlow Print Server software must be restarted for the change 
to take affect.

NOTE: The Image Quality default settings are optimized for the 
printer. If changes are made, the factory installed defaults can be 
restored by selecting [Defaults]. Selecting [Reset] sets the Image 
Quality parameters to the most recently applied setting.

To determine the print quality problem and possibly fix the 
problem, perform the following:

1. Retrieve the error page if one was printed.

2. Submit the job to a draft PostScript printer if one is available to 

determine if the master is valid.

3. Ensure that jobs are sent to the correct queue.

4. Ensure that a valid PDL is used.

5. If the problem still exists, recreate the job with a different print 

driver and resubmit the job to the printer.

A font problem exists when incorrect printed fonts have character 
spacing, jagged characters, text running off the page, or 
sentences running into each other.

To determine and fix the font problem, perform the following:

1. Determine if the font is being downloaded with the job.

NOTE:  If a downloaded font is not found, font substitution 
occurs and an error page is printed.

2. If the font is not being downloaded with the job, determine if 

the font is loaded on the server by viewing the Fonts module of 
the Xerox FreeFlow Print Server.