Xerox 701P25032 用户手册

10. Select [Reset].

If [Exit] is accidentally selected from the Xerox software, perform 
the following to start the software without rebooting the controller:

Open a terminal window and enter the following:

.openwin-init

If a job takes longer to process than anticipated and a 
performance problem is suspected, take the following steps to 
check the system:

1. Check the job status in the Job Manager window.

2. If the job status is Hold, select [Release] to process the job.

3. If the job is RIPing, check the performance meter. If the CPU 

activity is high, the decomposer is working. If this is not true, 
restart the Xerox FreeFlow Print Server software.

4. Submit the job to a draft printer to determine if the master is 

valid.

5. Check the time on the decomposer that is working on the job. 

For example, if the job is a PostScript job, type the following in 
a Terminal Window: ps -ae|grep ps_cdf

The system returns a time value along with the process ID of 
the PostScript decomposers that are running. Wait, then 
repeat the command. If the time displayed is increasing, then 
the job is RIPing.

For a PCL job, type: ps -ae|grep pcl_cdf

For a TIFF job, type: ps -ae|grep tiff_cdf

6. If problems still persist, contact the Customer Support Center.

If a job was submitted from a client with a save destination, but is 
not saved, perform the following:

1. Ensure that the banner and error pages are enabled,

2. Submit the job for printing.