Xerox 6140 用户手册
Maintenance
Phaser 6140 Color Laser Printer
User Guide
User Guide
112
Cleaning the Printer
This section includes:
•
•
•
•
General Precautions
Warning:
When cleaning your printer do NOT use organic or strong chemical solvents or aerosol
cleaners. Do NOT pour fluids directly into any area. Use supplies and cleaning materials only as
directed in this documentation. Keep all cleaning materials out of the reach of children.
directed in this documentation. Keep all cleaning materials out of the reach of children.
Warning:
Internal parts of the printer may be hot, especially the fuser. Use caution when doors
and covers are open.
Warning:
Do NOT use pressurized air-spray cleaning aids on or in the printer. Some pressurized air-
spray containers contain explosive mixtures and are not suitable for use in electrical applications.
Use of such cleaners can result in a risk of explosion and fire.
Use of such cleaners can result in a risk of explosion and fire.
Warning:
Do NOT remove the covers or guards that are fastened with screws. You cannot maintain
or service any parts that are behind these covers and guards. Do NOT attempt any maintenance
procedure that is NOT specifically described in the documentation supplied with your printer.
procedure that is NOT specifically described in the documentation supplied with your printer.
To avoid damaging the printer, keep the following guidelines in mind:
•
•
Do not place anything on top of the printer.
•
Do not leave the covers and doors open for any length of time, especially in well-lit places. Light
exposure can damage the imaging units.
exposure can damage the imaging units.
•
Do not open covers and doors during printing.
•
Do not tilt the printer while in use.
•
Do not touch the electrical contacts, gears, or laser devices. Doing so may damage the printer and
cause the print quality to deteriorate.
cause the print quality to deteriorate.
•
Make sure any parts removed during cleaning are reinstalled before you plug in the printer.
Cleaning the Exterior
Clean the exterior of the printer about once a month. Wipe the parts with a damp, soft cloth. Then
wipe with another dry soft cloth. For stubborn stains, apply a small amount of neutral detergent to the
cloth and gently wipe the stain off.
wipe with another dry soft cloth. For stubborn stains, apply a small amount of neutral detergent to the
cloth and gently wipe the stain off.
Caution:
Do not spray the detergent directly on the printer. The liquid detergent may enter the
printer through a gap and cause problems. Never use cleaning agents other than water or neutral
detergent.
detergent.