Xerox 6110 用户手册

Supplies and maintenance items

5.7

During the printing process, particles of paper, toner, and dust 
can accumulate inside the printer. Over time, this build-up can 

cause print quality problems such as toner specks or smearing. 
Your printer has a cleaning mode that can correct and prevent 
these types of problems.

Clean the printer cabinet with a soft lint-free cloth. You can 
dampen the cloth slightly with water, but be careful not to let 

any water drip onto the printer or inside of it.

: Cleaning the printer cabinet with cleaners 

containing large amounts of alcohol, solvents, or other strong 
substances can discolour or crack the cabinet.

Turn the printer off and unplug the power cord, then wait a 
few minutes for the printer to cool.

Open the front cover. 

Pull the imaging unit out of the printer using the handle on 
its bottom.

Extend the top handle on the imaging unit and then use it 

to pull the imaging unit out of the printer completely.

:

• Do not touch the green surface on the imaging unit with 

your hands or any other material. Use the handle on it in 

order to avoid touching this area.

• Be careful not to scratch the surface of the imaging unit.
• To prevent damage, do not expose the imaging unit to light 

for more than a few minutes. Cover it with a piece of paper 
to protect it if necessary.

Look inside the printer. Remove any dust, paper particles, 
and spilled toner with a damp, soft lint-free cloth.

: After cleaning, let the printer to dry completely.

Pull the imaging unit about half and push it until it sounds 
'click'. Repeat this action two or three times.