Xerox 6110 用户手册

Solving Problems

6.4

To remove the jammed paper, open the rear cover.

Carefully remove the paper by pulling in the direction as 
shown below. Most of the jammed paper can be removed 

in this step.

If you cannot find the jammed paper, or if there is any 

resistance removing the paper, stop pulling and go to the 
next step.

: If the paper tears, make sure that all of the paper 

fragments are removed from the printer.

Close the rear cover and then open the top cover.

Holding the inner cover open, carefully take the jammed 

paper out of the printer. The inner cover will then close 
automatically.

:

 Do not touch the fuser inside the inner cover. It is hot 

and could cause burns! The fuser’s operating temperature is 180 
°C (356 °F). Take care when removing paper from the printer.

Close the top cover. Make sure that it is securely closed.

Open and then close the rear cover or front cover to 
resume printing.