Xerox 6110 用户手册

Using Your Printer on a Network

7.1

If you work in a networked environment, the printer can be 
shared by other users on the network.

This chapter includes:
• About Sharing the Printer on a Network
• Setting Up a Network-Connected Printer (Phaser 

: If you are a Phaser 6110N user, you can only connect 

your printer to a network locally, for use via a single computer.

If you work in a networked environment, you can connect your 
printer to the network.

You can connect the printer directly to a selected computer, 
which is called the “host computer” on the network. The printer 
can then be shared by other users on the network through a 

Windows 98/Me/XP/NT 4.0/2000/2003 network printer 
connection.

For details about sharing the printer locally, see the Software 

Section.

The Phaser 6110N printer has a built-in network interface. For 

more information about connecting your printer to a network, see 
2.6.

Whether the printer is locally connected or network-connected, 
you need to install the Phaser 6110N series printer software on 
each computer that prints documents using the printer.

You have to set up the network protocols on the printer to use 

it as your network printer. Setting protocols can be 
accomplished by using the SetIP program.  

: The operating systems supported by the network card 

may be different than the operating systems supported by the 
printer. The following table shows the network environments 
supported by the printer. 

• TCP/IP: Transmission Control Protocol/Internet Protocol
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol

Network Interface

Ethernet 10/100 Base-TX (standard)

Network Operating 
System

• Windows 98/Me/NT 4.0/2000/2003/XP
• Various Linux OS

• Macintosh OS 10.3 ~ 10.4

Network Protocols

• TCP/IP on Windows 
• IPP,  SNMP

Dynamic Addressing 
Server

DHCP, BOOTP