Xerox 701P47853 用户手册

 

3 

 

•  The ink level percentages are only estimates.  One of the things to check if you are 

having image defects such as banding or voids is that there is ink in each of the cartridges. 

•  To check Ink status use the up “menu” button > select “ink Status”, this menu will show 

percentages and can also be used to check presence of ink cartridges. 

•  If the printer GFI power cord “trips” (turns off the power going to the printer), turn off 

the power switch on the printer (button must be in up position).  Press the reset button on 
the GFI (it may require several resets) and then turn the printer power switch back on. 

•  When printing large solid area coverage prints if vertical patterning is seen try reducing 

the A,B,C heater temperatures by 5 C. 

 
 

 

Control board errors 
E001, E002, E007, E016 – Power machine off & on several times if error will not clear – 
Call Service 
 
Mechanical errors 
E065 - E082 – If caused by media jam, clear media and power off and on printer. If error 
will not clear – Call Service 
 
Power and heater errors 
E100 – E129 – Call Service