Xerox WorkCentre 4265/S 用户手册

Installation and Setup

Xerox

WorkCentre

4265 Multifunction Printer

User Guide

Physically Connecting the Printer to the Network

Use a Category 5 or better Ethernet cable to connect the printer to the network. An Ethernet network is

used for one or more computers and supports many printers and systems simultaneously. An Ethernet

connection provides direct access to printer settings using CentreWare Internet Services.

To connect the printer:
1. Connect the power cord to the printer, and plug the cord into an electrical outlet.
2. Connect one end of a Category 5 or better Ethernet cable to the Ethernet port on the printer.

Connect the other end of the Ethernet cable to a correctly configured network port on a hub or

router.

3. Turn on the printer.

Note:

For details on configuring wireless network settings, see the

System Administrator Guide at

www.xerox.com/office/WC4265docs

Connecting to a Computer Using USB

To connect using USB, you need Windows XP SP3, Windows 7, Windows 8 or later, Windows Server 2003

or later, or Macintosh OS X version 10.5 or later.

To connect the printer to the computer using a USB cable:
1.  Connect the B end of a standard A/B USB 2.0 cable to the USB Port on the left side of the printer.
2.  Connect the A end of the USB cable to the USB port on the computer.
3.  If the Windows Found New Hardware Wizard appears, cancel it.
4.  Install the print drivers. For details, see

Installing the Software

on page 43.

Connecting to a Telephone Line

Note:

Not all options listed are supported on all printers. Some options apply only to a specific

printer model, configuration, operating system, or driver type.

1. Connect a standard RJ11 cable, No. 26 American Wire Gauge (AWG) or larger, to the Line port on

the back of the printer.

2. Connect the other end of the RJ11 cable to an operating telephone line.
3. Enable and configure the Fax functions.

For details, see the

System Administrator Guide at