Xerox 721P85530 用户手册
PRINT FORMAT COMMANDS
XEROX DOCUPRINT 180 LPS PDL REFERENCE
6-83
TRANS
This parameter specifies whether transparencies are used for the
print job.
print job.
Transparencies cannot be handled by the high-capacity feeder/
stacker. Due to this restriction, transparency jobs must feed from the
processor feed trays (trays 1 or 2; also known as MAIN and AUX
feed) and stack to the sample tray.
stacker. Due to this restriction, transparency jobs must feed from the
processor feed trays (trays 1 or 2; also known as MAIN and AUX
feed) and stack to the sample tray.
Syntax
OUTPUT TRANS =
option(s)
Options
Table 6-67 lists the parameter option(s) and definition(s).
UNITS
This parameter specifies the position of a graphic when referenced
by the IMAGE parameter of the OUTPUT command or an IMAGE,
ALTER, or GRAPHIC DJDE parameter.
by the IMAGE parameter of the OUTPUT command or an IMAGE,
ALTER, or GRAPHIC DJDE parameter.
Syntax
OUTPUT UNITS =
option(s)
Options
Table 6-68 lists the parameter option(s) and definition(s).
Table 6-68.
TRANS parameter option(s) and definition(s)
Option(s)
Definition(s)
YES
Indicates that transparencies will be used in the job.
NO
Indicates that transparencies will not be used in the
job.
job.
The default is NO.
Table 6-69.
UNITS parameter option(s) and definition(s)
Option(s)
Definition(s)
size in dots
Defines the dot size of a unit. The size defines the
number of dots in one unit and is specified as a
decimal number with up to two digits to the right of
the decimal point. When used to compute the
position of a graphic, the result is rounded to the
nearest dot.
number of dots in one unit and is specified as a
decimal number with up to two digits to the right of
the decimal point. When used to compute the
position of a graphic, the result is rounded to the
nearest dot.
There is no default.