Xerox 721P85530 用户手册
SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
XEROX DOCUPRINT 180 LPS PDL REFERENCE
8-47
The parameters T, H, and n/d are not order dependent. They may be
coded as needed without extra position holding commas.
coded as needed without extra position holding commas.
If the UN parameter is used to define position, the UNITS parameter
must precede this command in the OUTPUT command.
must precede this command in the OUTPUT command.
Example
IMAGE=(IMG1, 3, 2), END;
INVERT
This parameter specifies that the following pages are to be inverted.
When specified in a DJDE data stream (page oriented), this feature
allows the DocuPrint 180 to invert the image on a physical page by
180 degrees.
When specified in a DJDE data stream (page oriented), this feature
allows the DocuPrint 180 to invert the image on a physical page by
180 degrees.
Syntax
INVERT =
option(s)
Options
Table 8-32 lists the parameter option(s) and definition(s).
Table 8-36.
INVERT parameter option(s) and definition(s)
Option(s)
Definition(s)
FRONT
Specifies page inversion on front sides.
BACK
Specifies page inversion on back sides.
BOTH
Specifies page inversion on both front and back
sides.
sides.
NONE
Specifies turning page inversion off.