Xerox 721P85530 用户手册
SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
8-50
XEROX DOCUPRINT 180 LPS PDL REFERENCE
MARGIN
This parameter specifies the left printing margin within each logical
page. It takes effect at the logical page following a DJDE END
parameter. The parameters are the same as in the LINE command
defined in the chapter "Print format commands."
page. It takes effect at the logical page following a DJDE END
parameter. The parameters are the same as in the LINE command
defined in the chapter "Print format commands."
Syntax
MARGIN =
option(s)
Options
Table 8-37 lists the parameter option(s) and definition(s).
Table 8-41.
MARGIN parameter option(s) and definition(s)
Option(s)
Definition(s)
{
value
|
(
value
,
value-
type
)}
This option has the following components:
•
value
The form
nnn.mm
(a positive decimal number
with up to 2 digits to the right of the decimal
point) which is the distance from the left
margin.
point) which is the distance from the left
margin.
•
value-type
Indicates whether a value is specified in
inches (IN), centimeters (CM), or character
positions (POS). A value must be specified as
an integer (
inches (IN), centimeters (CM), or character
positions (POS). A value must be specified as
an integer (
nnn
), if a value-type is character
positions.
The default is (1,POS).
Refer to the "Points to note" for the VOLUME
command in the chapter "Specifying input
parameters" for additional information.
command in the chapter "Specifying input
parameters" for additional information.