Xerox 721P85530 用户手册
SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
8-68
XEROX DOCUPRINT 180 LPS PDL REFERENCE
TRANS
This parameter specifies whether or not transparencies are used in
the print job.
the print job.
Syntax
TRANS =
option(s)
Options
Table 8-59 lists the parameter option(s) and definition(s).
XSHIFT
This parameter specifies whether the image of the form and data on
a page is to be shifted, and if so, by what values. This parameter is
used to shift the image of the data for two-hole paper, binding,
finishing, and edgemarking. XSHIFT allows shifting in the x-direction
for short-edge binding.
a page is to be shifted, and if so, by what values. This parameter is
used to shift the image of the data for two-hole paper, binding,
finishing, and edgemarking. XSHIFT allows shifting in the x-direction
for short-edge binding.
Syntax
XSHIFT =
option(s)
Options
Table 8-60 lists the parameter option(s) and definition(s).
Table 8-63.
TRANS parameter option(s) and definition(s)
Option(s)
Definition(s)
YES
Specifies that transparencies are used in the print
job.
job.
NO
Specifies that transparencies are not used in the print
job.
job.
Table 8-64.
XSHIFT parameter option(s) and definition(s)
Option(s)
Definition(s)
NO
Specifies that no shift occurs.
value
An integer that specifies a shift amount on the front
and back side. The shift is in the x-direction and each
dot is 1/300 of an inch. The allowable range is 75 to
-75.
and back side. The shift is in the x-direction and each
dot is 1/300 of an inch. The allowable range is 75 to
-75.