Xerox t 180 用户手册
SYSGEN COMMANDS
XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE
2-3
Entering and abbreviating commands
Refer to the following directions when entering commands.
Entering commands
Enter commands after the sysgen prompt character (>), then press
<ENTER>.
<ENTER>.
After the command has completed processing, the prompt character
displays again (except after the BOOT command). The menu need
not display for you to issue a command.
displays again (except after the BOOT command). The menu need
not display for you to issue a command.
Abbreviating commands
The command may be entered as shown in the menu or may be
abbreviated to as few letters as necessary to differentiate it from any
other command in the menu.
abbreviated to as few letters as necessary to differentiate it from any
other command in the menu.
Example
To enter the command SYSGEN, you can enter any of the following
abbreviations:
abbreviations:
•
S
•
SY
•
SYS
•
SYSG
•
SYSGE
•
...or by SYSGEN spelled out in full.
Command strings
You may enter several commands as a string, and the system
executes them serially. For example, entering FORMAT, SYSGEN,
and BOOT, then pressing <ENTER>, results in each procedure
being invoked in turn unless fatal errors occur.
executes them serially. For example, entering FORMAT, SYSGEN,
and BOOT, then pressing <ENTER>, results in each procedure
being invoked in turn unless fatal errors occur.