Xerox t 180 用户手册

SYSGEN AND SYSGEN-RELATED PROCEDURES

4-2

XEROX DOCUPRINT 180 LPS SYSTEM GENERATION GUIDE

Installing and upgrading System UI software

Use the information given below when installing or upgrading System
UI software.

Materials required

System UI diskette.

Time required

System UI software installation takes about 5 minutes to complete.

Procedure

To install or upgrade System UI software, follow these steps:

Step 1.

Select “Exit to DOS” from the System Control menu.

Step 2.

Select “Yes” from the “Exit to DOS” window.

Step 3.

Insert the System UI software diskette.

Step 4.

Key in A: and press <ENTER>.

Step 5.

Key in INSTALL and press <ENTER>.

Step 6.

At the "Xerox DocuPrint 180 System UI Setup" window, select
“CONTINUE”.

Step 7.

At the “Xerox DocuPrint 180 System UI Setup” Message window,
select “CONTINUE”.

Step 8.

At the “Xerox DocuPrint 180 PC UI System Configuration” window,
select “CONTINUE”.

Step 9.

At the “Destination for Xerox DocuPrint 180 System UI” window,
select “CONTINUE”

Step 10.

Select “Exit Windows” in the “Xerox DocuPrint 180 System UI Setup
Exit Message” window.

Step 11.

Remove the diskette.

System UI software installation is now complete. If you are
performing an upgrade, press the Reset button to finish the
procedure. Proceed to the “Installing or upgrading System UI dialog”
procedure.