Xerox 6120 用户手册

Your printer and supplies were designed and tested to meet strict safety 
requirements. These include safety agency examination, approval, and 
compliance with established environmental standards.
Your attention to the following safety guidelines helps to ensure the 
continued, safe operation of your printer.

„

Wait 10-15 seconds between turning the printer off and on.

„

Keep hands, hair, neckties, etc., away from the exit and feed rollers.

„

When the printer is printing:
„

Do not remove the paper source tray that you selected in either the 
printer driver or control panel.

„

Do not open the doors.

„

Do not move the printer.

„

Do not block or cover the slots and openings on the printer. The printer 
may overheat without adequate ventilation.

„

Do not place the printer near a heat source.

„

Do not place the printer in direct sunlight to avoid exposing light-sensitive 
components when the doors are open.

„

Do not place the printer in line with the cold air flow from an air 
conditioning system.

„

Place the printer on a level, solid non-vibrating surface with adequate 
strength for the weight of the printer. It should be within 2° of horizontal 
with all four feet in solid contact with the surface. The base printer weight 
without any packaging materials is approximately 20.5 kg (45 lb.).

„

For optimum performance, use the printer at elevations below 2,500 m 
(8,200 ft.).

Place the printer in an area where there is adequate space for ventilation, 
operation, and servicing. For information about the printer clearance, see 
“Getting Acquainted with Your Printer” on page 2.