Xerox 3150 用户手册
2
Using the Printer on a Network
About Network Printing
The Network Interface Card is an internal print server for
10/100 Base TX networks. You can use your printer in a network
environment by installing this network interface card in an
optional interface slot of the Xerox Phaser 3150 printer.
10/100 Base TX networks. You can use your printer in a network
environment by installing this network interface card in an
optional interface slot of the Xerox Phaser 3150 printer.
To connect your printer to the network and use it as the network
printer, you will need to do the followings:
printer, you will need to do the followings:
• Set an IP address. See page 6.
• Install the printer driver on each computer connected to the
network using the supplied CD.
• Set the Xerox Network Printer Port. See page 7.
After setting the IP address, install the printer driver using the
supplied CD on each computer connected to the network and set
the Xerox Network Printer Port. To set the Xerox Network Printer
Port, see page 7. Then you can use your printer as the network
printer.
supplied CD on each computer connected to the network and set
the Xerox Network Printer Port. To set the Xerox Network Printer
Port, see page 7. Then you can use your printer as the network
printer.
Installing a Network Card
To use your printer on a network, you need to install an optional
network interface card.
network interface card.
1
Turn the printer’s power off and unplug all cables from the
printer.
printer.
2
Remove the two screws on the back of the printer.
uUGGwGYGGm SGq GX]SGYWW[GGYa\XGwt