Xerox 3320/DNI 用户手册
Setup Options
Xerox Phaser 3320DN/3320DNI
User Guide
85
For more detailed information refer to the
Xerox Phaser 3320DN/3320DNI System Administrator
Guide
.
Option
Description
Settings
* denotes factory default
TCP/IP(IPv4)
Selects the appropriate protocol and
configures parameters to use the network
environment.
configures parameters to use the network
environment.
Note:
There are lots of parameters to be
set. If you are not sure, leave as is, or
consult the network administrator.
consult the network administrator.
•
DHCP*
•
BOOTP
•
Static
TCP/IP(IPv6)
Selects this option to use the network
through IPv6.
through IPv6.
IPv6 Activate:
•
On*/ Off
DHCPV6 Config:
•
Router*
•
DHCPv6 Address
•
DHCPv6 Off
Ethernet Speed
Configure the network transmission speed.
•
Auto*
•
10M Half
•
10M Full
•
100M Half
•
100M Full
•
Giga Full
802.1x
Use to enable 802.1x and CentreWare
Internet Services.
Internet Services.
Off* / On:
•
EAP-MD5
•
EAP-MSCHAPv2
•
PEAP
•
EAP-TLS
Wireless (Phaser
3320DNI only)
3320DNI only)
Use to enable the machine to be
configured on a wireless network
connection.
configured on a wireless network
connection.
Note:
If you choose a wireless connection
for your printer, you cannot use a wired
connection at the same time.
connection at the same time.
Wi-Fi:
•
On / Off
WPS Setting:
•
PBC*
•
PIN
WLAN Default:
•
Restore
WLAN Signal:
•
Excellent
•
Very Good
•
Good
•
Low
•
Very Low
•
No Signal
Clear Setting
Reverts the network settings to the default
values.
values.
•
Clear? Yes / No
Network Conf.
Enables printing of the Network
Configuration report.
Configuration report.
•
Print? Yes / No