Xerox 3320/DNI 用户手册
Troubleshooting
Xerox Phaser 3320DN/3320DNI
User Guide
93
Troubleshooting
If a problem occurs, messages appear on the control panel display to indicate the error. Perform the
following problem solving procedure:
following problem solving procedure:
1.
When errors occur, a message appears on the display. Press OK.
2.
Check the display message to see what kind of error has occurred.
If several messages appear, press the up/down arrows to highlight the message you want solve.
3.
Use the following information to resolve the problem:
•
•
•
•
•
4.
Press OK on the control panel. If the error message still appears, repeat the procedure.
5.
If the problem cannot be resolved, power off and on, and try the job again.
If the problem persists, call for service. When you call for service, provide the service representative
with the contents of the display message.
with the contents of the display message.
Status / Wireless LED
The color of the Status / Wireless LED located on the control panel indicate’s the machine’s current
status. The table below describes the various indicators.
status. The table below describes the various indicators.
Note:
Some LEDs may not be available, depending on machine configuration.
LED
Color
Status
Description
Status LED
None
Off
Machine is offline
Green
On
The machine is on-line and can be used.
Green
Blinking
When the backlight blinks. the machine is receiving and
printing data.
printing data.
Orange
On
• A cover is open. Close the cover.
• There is no paper in the tray. Load paper in the tray.
• There is no paper in the tray. Load paper in the tray.
• The machine has stopped due to a fault. Check the
display message to resolve.
• The print cartridge has reached its estimated end of
life. Replace the print cartridge - see