Xerox Printer fwww 用户手册
9
.2
<Faxing (Phaser 6110MFP/XN only)>
Recommended resolution settings for different original document types
are described in the table below:
are described in the table below:
Darkness
You can select the default contrast mode to fax your originals lighter or
darker.
darker.
1
Press Fax.
2
Press Menu, and then Enter when Fax Feature appears on the
bottom line of the display.
bottom line of the display.
3
Press Enter when Lighten/Darken appears.
4
Press the Scroll buttons until the option you want appears and
press Enter.
press Enter.
5
Press Stop/Clear to return to Standby mode.
Mode
Recommended for:
Standard
Originals with normal sized characters.
Fine
Originals containing small characters or thin lines or
originals printed using a dot-matrix printer.
originals printed using a dot-matrix printer.
Super Fine
Originals containing extremely fine detail. Super
Fine mode is enabled only if the machine with
which you are communicating also supports the
Super Fine resolution.
Fine mode is enabled only if the machine with
which you are communicating also supports the
Super Fine resolution.
Photo Fax
Originals containing shades of gray or photographs.
Note
• The resolution setting is applied to the current fax job. To
change the default setting, see page 10.2.
Note
• The darkness setting is applied to the current fax job. To
change the default setting, see page 10.2.
Notes
• For memory transmission, Super Fine
mode is not available. The resolution
setting is automatically changed to Fine.
setting is automatically changed to Fine.
• When your machine is set to Super Fine
resolution and the fax machine with which
you are communicating does not support
Super Fine
you are communicating does not support
Super Fine
resolution, the machine
transmits using the highest resolution
mode supported by the other fax machine.
mode supported by the other fax machine.
Sending a fax automatically
1
Press Fax.
2
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
down on the scanner glass.
For details about loading an original, see page 5.1.
Ready to Fax
appears on the top line of the display.
3
Adjust the resolution and the darkness to suit your fax needs.
4
Enter the receiving fax machine’s number.
You can use speed buttons, speed dial numbers, or group dial
numbers. For details about storing and searching for a number, see
page 10.3.
numbers. For details about storing and searching for a number, see
page 10.3.
5
Press Color Start or Black Start.
6
If an original is placed on the scanner glass, select Yes to add
another page. Load another original and press Enter.
another page. Load another original and press Enter.
7
When you have finished, select No at the Another Page? prompt.
After the number is dialed, the machine begins sending the fax
when the receiving fax machine answers.
when the receiving fax machine answers.
Sending a fax manually
1
Press Fax.
2
Load originals face up into the ADF, or place a single original face
down on the scanner glass.
down on the scanner glass.
For details about loading an original, see page 5.1.
3
Adjust the resolution and the darkness to suit your fax needs. See
page 9.1.
page 9.1.
4
Press Manual Dial. You hear a dial tone.
5
Enter the receiving fax machine’s number.
You can use speed buttons, speed dial numbers, or group dial
numbers. For details about storing and searching for a number, see
page 10.3.
numbers. For details about storing and searching for a number, see
page 10.3.
6
Press Color Start or Black Start when you hear a high-pitched fax
signal from the remote fax machine.
signal from the remote fax machine.
Note
• When you want to cancel a fax job, press Stop/Clear at any
time while sending.
Note
• When you want to cancel a fax job, press Stop/Clear at any
time while sending.