Xerox WC PE120 Series 用户手册

Getting Started

2.23

Press Menu until “Sound/Volume” appears on the top line 
of the display.

Press the scroll button (W or X) to scroll through the 
options. Press Enter when you see the desired sound 

option.

Press the scroll button (W or X) to display the desired 
status or volume for the option you have selected.

You will see the selection on the bottom line of the display. 

For the ringer volume, you can select “Off,” “Low,” “Med,” 

and “High.” Setting “Off” means that the ringer does not 

sound. The machine works normally even if the ringer is 

turned off.

Press Enter to save the selection. The next sound option 
appears.

If necessary, repeat steps 2 through 4.

To return to Standby mode, press Stop/Clear.

Press Manual Dial. A dial tone sounds from the speaker.

Press the scroll button (W or X) until you hear the volume 
you want. The display shows the current volume level.

Press Manual Dial to save the change and return to 
Standby mode.

: You can adjust the speaker volume only when the 

telephone line is connected.