Xerox 3435DN 用户手册
4.3
<Network setup>
Printing a network configuration page
The network configuration page shows how the network interface card
on your printer is configured.
on your printer is configured.
1
Press Menu until Network appears on the bottom line of the
display and press OK.
display and press OK.
2
Press the Up/down arrow buttons until Network Info. appears and
press OK.
press OK.
3
Press OK when Yes appears.
The network configuration page prints out.
Configuring 802.1x
Your printer has 802.1x protocol on its network. 802.1x is a security
standard for port based network access control. It secures your network
against unauthorized access by requiring authentication before network
access and data transmission are allowed. There are 3 mutually
exclusive options for 802.1x authentication.
standard for port based network access control. It secures your network
against unauthorized access by requiring authentication before network
access and data transmission are allowed. There are 3 mutually
exclusive options for 802.1x authentication.
To use 802.1x, take the following steps:
1
Press Menu until Network appears on the bottom line of the
display and press OK.
display and press OK.
2
Press the Up/down arrow buttons until 802.1x appears and press
OK.
OK.
3
Press the Up/down arrow buttons until On appears and press OK.
4
Press the Up/down arrow buttons until the desired authentication
method appears.
• EAP-MD5: EAP-MD5 (Extensible Authentication Protocol
method appears.
• EAP-MD5: EAP-MD5 (Extensible Authentication Protocol
Message Digest algorithm 5) is a message hashing scheme
between client and server to allow the transfer of user data in a
secure fashion.
between client and server to allow the transfer of user data in a
secure fashion.
• EAP-MSCHAPv2: EAP-MSCHAP (Extensible Authentication
Protocol Microsoft version of the Challenge-Handshake
Authentication Protocol). MSCHAP v2 is a one-way encrypted
password, mutual authentication process. MS-CHAPv2 uses
different hashing/encryption algorithms to encode the UserID and
passwords.
Authentication Protocol). MSCHAP v2 is a one-way encrypted
password, mutual authentication process. MS-CHAPv2 uses
different hashing/encryption algorithms to encode the UserID and
passwords.
• PEAP: PEAP (Protected EAP).
5
Enter user name and passcode using Up/down arrow button.
6
Press OK to save the selection.
7
Press Start/Stop to return to Standby mode.
Configuring CentreWare IS
Your printer can use CentreWare IS (Internet Services). To enable
CentreWare IS, take the following steps:
CentreWare IS, take the following steps:
1
Press Menu until Network appears on the bottom line of the
display and press OK.
display and press OK.
2
Press the Up/down arrow buttons until CentreWare IS appears
and press OK.
and press OK.
3
Press the Up/down arrow buttons until On appears and press OK.