Manualsbrain.com
  1. 份说明书
  2. 个品牌
  3. Xerox
  4. 360
  5. 用户手册

Xerox 360 用户手册

下载
页码 共 184
PhaserShare Networking Manual
69
TCP/IP Printer Configuration (All Platforms)
7
Enabling and disabling RARP and BOOTP/DHCP (front panel)
RARP, BOOTP, and DHCP can be enabled and disabled from the front panel.  The 
default is enabled.  When you set the IP addressing parameters from the front panel, 
the front panel selections for DHCP/BOOTP and RARP are automatically set to 
Disabled.  To disable these protocols manually, follow the procedure for your printer:
■
■
Phaser 740 and 360 printers
1.
Press 
Menu
; the front panel displays  
Help Pages
.   
2.
Press 
---->
 or 
<----
 until the front panel displays 
Network Settings
.
3.
Press 
Menu
 until the front panel displays 
TCP/IP
.
4.
Press 
Menu
 again; the front panel displays 
Interface
.
5.
To disable DHCP/BOOTP:
a.
Press 
---->
 until the front panel displays 
DHCP/BOOTP
.
b.
Press 
Menu
 again to display the current status of the protocol: 
 
Interface:Enabled 
or 
Interface:Disabled
.  The current status 
is marked with an asterisk (
*
) in the upper-right corner of the display.
c.
Press 
---->
 until the front panel displays 
Interface:Disabled
.
d.
Press 
OK
 to disable the protocol; the front panel briefly displays 
Selected
, then it displays 
Interface
.
e.
Press Exit (the far left button) to return to the 
Interface
 display.
6.
To disable RARP:
a.
Press 
---->
 until the front panel displays RARP.
b.
Press 
Menu
 again to display the current status of the protocol: 
 
Interface:Enabled 
or 
Interface:Disabled
.  The current status 
is marked with an asterisk (
*
) in the upper-right corner of the display.
c.
Press 
---->
 until the front panel displays 
Interface:Disabled
.
d.
Press 
OK
 to disable the protocol; the front panel briefly displays 
Selected
, then it displays 
Interface
.
e.
Press Exit (the far left button) to return to the 
Interface
 display.