Xerox 5222 用户手册

2 Paper and Other Media 

18

NOTE: When changing the size or type of stock in the tray, refer to 

Load the paper neatly and tightly 
against the left-hand side of the 
tray.

NOTE: Do not load paper above the 
maximum fill line.

NOTE: When making single/double 
sided copies on perforated paper, 
load the paper to feed the opposite 
side of the perforated edge first. 
Feeding the perforated edge first may cause paper jams.

If the paper guides have been 
moved, slide the guides to just 
touch the edge of the paper.

NOTE: When loading standard size 
paper, set the guides onto the 
notches on the tray to match the 
paper size. The machine recognizes 
8K/16K paper as standard sizes 
even though the paper trays have no 
notches for these sizes.

Close the paper tray.

NOTE: Paper can be loaded either 
short edge feed or long edge feed.

Set the machine to detect the 
paper size automatically, or 
manually specify the required 
size. For more information, 
refer to 

NOTE: Paper sizes detected by the machine vary depending on the system settings. 
For more information, refer to 

The High Capacity Tandem Tray (Trays 3 and 4) allows you to load up to 2,000 sheets 
of paper.
NOTE: You cannot load custom size paper into the High Capacity Tandem Tray.

Pull out Tray 3 or 4.
The elevator in the tray lowers.

Place the paper stock tightly 
against the left rear corner of the 
tray.

NOTE: Do not load paper above the 
maximum fill line.

Long edge feed
(LEF)

Short edge feed
(SEF)