Xerox 5222 用户手册

Microsoft Networking 

251

To make sure that the machine has been installed on the network correctly, a test print 
should be submitted from each client computer. Perform the following steps.

Open a sample document on a client computer.

Select the machine using the Chooser (Mac OS 9.2) or the Print Center (Mac OS 
X 10.x).

Print the document on the machine and verify that it prints correctly.

Make sure that the driver is installed on every computer that will be sending jobs 
to the machine.

Repeat the test for all computers that will be sending jobs to the machine.

The installation process is now complete.
If the test print fails, refer to 

This section explains how to set up the machine to operate on a Microsoft network. The 
following information is provided:

Information Checklist – page 251
SMB Environments – page 252
SMB Installation – page 252
Installation Procedure – page 252
Network Communication Setup – page 253
Computer Setup – page 255
Test Print – page 255

Before starting the Microsoft networking installation procedures, make sure that the 
following items are available or have been performed.

If problems are encountered during the installation, refer to 

An existing operational Microsoft network is required. These procedures 
are not designed to install a Microsoft network.

Customer

Obtain and record the following information, if required:
• IP address
• Gateway address
• Subnet mask (for IPv4) / Prefix (for IPv6)
• Host name

Customer

Test the machine to make sure that it is fully installed and functioning 
correctly.

Customer

Install the print driver.

Customer