Xerox 5222 用户手册

Job Flow Service Setup 

285

On the control panel, select [Scan to PC].

Enter all the information required. See the User Guide for more detailed 
information.

Load a sample document into the document feeder.

Press the <Start> button on the machine.

Log on to the SMB server. Navigate to the directory path (repository) that was set 
up earlier on the server. Your scanned document can be found in the specified 
directory.

NOTE: If Remote Authentication has been enabled, a separate login screen appears 
when the Scan to PC (SMB) service is selected. Documents are not scanned unless 
the authentication server authenticates user access.

To use the Job Flow service, you need to enable the SOAP port, the SNMP port, and 
the Internet Services (HTTP) port, and then to set the IP address. The procedure for 
configuring the machine is as follows.
NOTE: The configuration can also be performed using CentreWare Internet Services. 
For details, refer to 

Enter the System Administration mode, and press the <Machine Status> button 
on the control panel and then select the [Tools] tab on the touch screen.

NOTE: For details on how to enter the System Administration mode, refer to 

Enable the SOAP port.

Server Shared Name

Required

This is the name assigned to the shared 
folder on the SMB server.

Repository – directory path, where 
the document will be stored on the 
SMB server

Required

This is the location or path of the directory for 
saving scanned documents.

SMB Login/password information

Optional

This is required if the SMB server requires 
login/password authentication. Most SMB 
servers require a login/password.

Remote Authentication Server’s IP 
Address

Optional

If Remote Authentication is required, then the 
Authentication feature needs to be enabled.