Xerox 5222 用户手册

16 Appendix 

432

Open your web browser.

Enter the IP address of the machine in the [Address] or [Location] field.

Click [Enter] to access CentreWare Internet Services.

Enable the machine for EIP applications:

a) Click the [Properties] tab.
b) Click the [Services] folder, and then the [Custom Services] link.
c) On the [Custom Services] page, select the [Enabled] button.
d) Click [Apply].

Generate a digital certificate (if needed):
a) Click the [Properties] tab.
b) Click the [Security] folder, and then the [Machine Digital Certificate 

Management] link.

c) Click the [Create New Self Signed Certificate] button. The [Machine Digital 

Certificate Management] page refreshes and displays the [Self-Signed 
Certificate] area.

d) In the [Self-Signed Certificate] area, click [Apply].

Enable SSL:

a) Click the [Properties] tab.
b) Click the [Security] folder, and then the [SSL/TLS Settings] link.
c) If prompted, enter your System Administrator ID and passcode. The default 

System Administrator ID and passcode are “11111” and “x-admin” respectively.

d) In the [SSL/TLS Settings] area, on the [HTTP-SSL/TLS Communication] line, 

place a check mark in the [Enabled] box.

e) Click [Apply].
f) If changes were made to the SSL settings, the machine will reboot.

Enable the ports:

a) Click the [Properties] tab.
b) Click the [Connectivity] folder, and then [Port Settings].
c) On the SNMP line, place a check mark in the [Enabled] box.
d) On the SMB line, place a check mark in the [Enabled] box.
e) On the FTP line, place a check mark in the [Enabled] box.
f) On the SOAP line, place a check mark in the [Enabled] box.
g) Click [Apply].

Ensure that TCP/IP is configured:

a) Click the [Properties] tab.
b) Click the [Connectivity] folder, and then the [Protocols] folder.
c) In the [Protocols] folder, click [TCP/IP].
d) In [IP Mode], ensure that TCP/IP is configured.