Xerox 3116 用户手册

I

NTRODUCTION

1.7

If the  

  and  

  LEDs blink, your system has some 

problems. To solve the problem, see “Troubleshooting Error 
Messages” on page 6.18

In Ready mode, press and hold this button for about 2 
seconds until all LEDs blink slowly, and release. 

Press this button each time you load a sheet of paper in the 
manual feeder, when you select Manual Feed for Source 
from your software application. For detailed information, 
see “Using the Manual Feeder” on page 3.8. 

In Ready mode, press and hold this button for about 10 
seconds until all LEDs turn on, and release. After cleaning 
the printer, one cleaning sheet is printed.

Press this button during printing. The  

  LED blinks 

while the print job is cleared from both the printer and the 
computer, and then return to Ready mode. This may take 
some time depending on the size of the print job. 

In Manual Feed mode, you can’t cancel the print job by 
pressing this button. For detailed information, see “Using 
the Manual Feeder” on page 3.8.