Xerox 5230 用户手册

4 Fax 

106

This feature enables fax transmissions using the F Code standard defined by the 
Communications and Information network Association of Japan. The F Code standard 
is based on Recommendation T.30 defined by ITU Telecommunication Standardization 
Sector (ITU-T), and allows communication with remote machines that support the 
same standard regardless of their manufacturers.
You must know the F Code and the password (if one is set up) of the remote machine 
before sending or retrieving a document. If you are retrieving a document from a remote 
machine, the machine holding the document must know the F Code (preceded with “0” 
to indicate the confidential fax transmission) and the password of your machine as well.

• Confidential sending using F Code
You can send a confidential fax document using F Code, if a confidential mailbox is set 
up in the remote machine. You must know the remote machine’s F Code and password 
(if set up) before sending the document.
Example:
F Code: 0 (to designate an F Code transmission) followed by the mailbox number
Password (if set up): the password for the mailbox

• Confidential polling using F Code
You can send a polling request to receive a document from a remote machine using F 
Code, if a confidential mailbox is set up in the remote machine to hold the document to 
be polled. When polling to receive a document from a remote machine, you must know 
the following information:
F Code: 0 (to designate an F Code transmission) followed by the remote machine’s 
mailbox number in which the document to be polled to your machine is stored
Password (if set up): the password for the remote machine’s mailbox
The confidential document received by the machine is stored in a confidential mailbox. 
The machine can be set up to automatically print out a Mailbox Documents Report to 
show the number and name of the mailbox in which the document is stored. To receive 
a confidential document using F Code, the other party must know the following 
information.
F Code: 0 (to designate an F Code transmission) followed by the mailbox number on 
your machine
Password (if set up): the password for the mailbox
NOTE: To retrieve a document from a remote machine, the polling feature must be 
enabled. For more information, refer to 

NOTE: This feature is not displayed for Internet Fax transmissions. However, you can 
use the same feature by specifying an F Code directly in the Internet Fax destination 
address.

Select [F Code] on the [Fax 
Options] screen.

Select the required option.

Select [Save].