Xerox 5230 用户手册

3 Copy 

52

You can temporarily use the bypass tray to load paper that is unavailable from Trays 
1-4. Up to a 10 mm (0.4 inch) stack of paper (approximately 95 sheets of 80 g/m

2

 

paper) can be loaded in the bypass tray.

• Auto Size Detect - Detects the 

paper size automatically.

• Standard Size - Displays the 

preset paper sizes on the touch 
screen, and allows you to select a paper size. The presets are set up by the System 
Administrator.

• Custom Size - Allows you to specify the width and length of the paper size using the 

scroll buttons in 1 mm (0.1 inch) increments. The acceptable ranges of paper sizes 
are 89-297 mm (3.5-11.7 inches) for the width and 99-432 mm (3.9-17.0 inches) for 
the length.

Paper Type
Displays the preset paper types on the touch screen, and allows you to select the paper 
type. The presets are set up by the System Administrator. The setting is only temporary 
and applies only to the current copy job.

This feature allows you to automatically make single or double-sided copies from single 
or double-sided documents.
NOTE: Before using the feature, specify the document orientation to indicate the top 
of the document in [Original Orientation] on the [Layout Adjustment] screen.

NOTE: The 2 Sided Copying option cannot be used with the following paper types: 
Transparency, Lightweight, Heavyweight, Labels, Bond, as well as paper already 
printed on one side.

Select a preset button or [More] 
for the [2 Sided Copying] 
feature on the [Copy] screen.

More
Displays the [2 Sided Copying] screen. For more information, refer to