Xerox 5252 用户手册

DocuColor 5252 O perator Manual

4-10

Paper and Paper Trays

3-hole drilled paper runs from Trays 1, 2, and 3.
Drilled paper should be run in the Simplex (1-sided) and Duplex 
(2-sided) orientations shown below to avoid paper jams caused by 
the holes not aligning correctly with the paper sensor in the press.

Load the drilled paper into Trays 1, 2, or 3 Long Edge Feed (LEF) 
with the holes at the lead edge position. Refer to the following 
illustration:

Load drilled paper into Trays 1, 2, or 3 with the holes positioned 
toward the rear of the paper tray. Refer to the following illustration:

If you are stapling 3-hole drilled paper with the optional 

High Capacity Stacker Stapler, refer to the Accessories chapter 
(see page 6-4) for paper loading instructions, based on the 
position of the staple.