Xerox 5252 用户手册
DocuColor 5252 Operator Manual
6-23
Accessories
6
A
cce
cce
ss
o
o
ries
Unloading the Stacker Tray
Use the following procedure to unload the Stacker Tray when it is
full, or you want to retrieve a job that has been completed.
full, or you want to retrieve a job that has been completed.
1
Press the Unload button on the Stacker Control Panel. The Wait
light blinks until the Stacker Tray has reached the down position.
light blinks until the Stacker Tray has reached the down position.
2
Open the front door when the Unload Light illuminates.
3
Position the securing bar on top of the stacked paper.
4
Pull the Stacker Cart straight out.
5
Remove the securing bar.
6
Remove the paper from the Stacker Tray.
7
Push the empty Stacker Cart straight into the EHCS.
8
Position the securing bar on the fixed area inside the EHCS.
Note:
The front door will not close if the securing bar is not
properly attached to the stacker frame.
9
Close the EHCS front door.
10
Follow the instructions displayed on the digital press Touch
Screen to resume printing.
Screen to resume printing.