Xerox 4500 ps eth 用户手册
Appendix Section
Xerox 4500 PS ETH, Inst. & Operator's Guide
Xerox 4500 PS ETH, Inst. & Operator's Guide
165
END
6. Make a settings printout to verify the new settings.
Appendix A 2: Configuration file parameters
This appendix describes the entire range of parameters available for
programming the PrintServer.
programming the PrintServer.
BEGIN_CONFIGURATION IDAPS
LOCAL_MAC
Description: Sets the locally administered MAC address
Range:
Description: Sets the locally administered MAC address
Range:
0x400000000000 - 0x7FFFFFFFFFFF
Default:
N/A
SEL_MAC
Description: Selects the universally defined or the locally
Description: Selects the universally defined or the locally
administered MAC address
Range:
LOCAL
(0)
UNIVERSAL (1)
Default:
UNIVERSAL
ENABLE_TCPIP
Description: Enables or disables the TCP/IP protocol
Range:
Description: Enables or disables the TCP/IP protocol
Range:
NO (0)
YES (1)
YES (1)
Default:
YES
ENABLE_NETWARE
Description: Enables or disables NetWare (IPX/SPX)
Description: Enables or disables NetWare (IPX/SPX)
protocols.
Range:
NO (0)
YES (1)
YES (1)
Default:
YES
ENABLE 802_2
Description: Enables or disables the 802.2 settings
Range:
Description: Enables or disables the 802.2 settings
Range:
NO (0)
YES (1)
YES (1)
Default:
YES
ENABLE_PU_LU
Description: Enables or disables the use of the NetWare (IPX/SPX)
Description: Enables or disables the use of the NetWare (IPX/SPX)
protocols.