Xerox 4500 ps eth 用户手册

When you have filled in the first three entries in the menu for the Hardware
Property Form:

- PrintServer name (a fully qualified domain name)
- Contact name
- Location (physical location of the unit)

.. you proceed to  the selection of your preferred protocol environment
and subsequently to the configuration of it

. This is necessary in order

for your system to be able to communicate with your PrintServer.

Select between:

- TCP/IP  (including SNMP - MIB II)
- IPX/SPX (Netware)
- PU/LU (SNA)
- NetBIOS/NetBEUI (Windows and OS/2)

You enable the TCP/IP protocol by clicking the check box to the immediate
left of the header “TCP/IP”. When you have enabled the protocol, you will be
able to configure the following entries:

NOTE:  IP Address
To receive data on your network, you need to define an IP address.
This IP address is unique in the Internet environment and consists of a
network ID and a host ID.

Seek additional
information here